We make sure our 304 Stainless Steel Coil sticks strictly to ASTM A240 standards. It has 18-20% chromium and 8-11% nickel in its makeup-this mix creates a tight chromium oxide layer on the surface that keeps rust and corrosion at bay. When we run neutral salt spray tests following ASTM B117, it stays free of red rust for 500 hours. That's three times longer than what 201 stainless steel manages.
This coil pulls with a strength of 515-690 MPa and can stretch over 40%, so bending, stamping, or welding it doesn't cause cracks. It's a solid fit for kitchen gear, medical tools, and building decor-places where you need something that lasts and looks good too.
For 304 Stainless Steel Coil,we offer 2B and BA surface finishes. The 2B surface has a roughness Ra ≤ 0.8μm, suitable for most industrial uses; the BA surface, with Ra ≤ 0.1μm, gives a mirror-like look, perfect for decorative applications. Both undergo passivation treatment (per ASTM A967), forming a 3-5μm thick protective film that boosts corrosion resistance by 40%.
Slitting services are available with tight tolerances-width tolerance is ±0.1mm, and edge straightness stays within 0.3mm per meter. This ensures easy handling and minimizes waste when our clients process the coils further.
Our 4 continuous rolling lines are equipped with advanced cold-rolling mills, allowing us to control thickness deviation within ±0.02mm-this precision is 50% better than industry average.
For orders over 50 tons, we offer a 7% bulk discount, plus free slitting services and partial freight subsidy for FOB Shanghai. We guarantee that if any coil fails to meet ASTM A240 mechanical property standards or shows rust within 2 years under normal use (excluding improper handling), we'll replace it in full and cover related losses.
Stainless Steel Coil
ASTM A240, JIS G4305, EN 10088 etc.
2B, BA, No.1, No.4, HL, Mirror, etc.
Scope of Application
Extensively used in Construction, kitchen equipment, chemical, food & beverage, medical, shipbuilding, automotive, decoration, etc.
Certificate
ISO 9001, SGS, BV, Mill Test Certificate
Production Technology
Cold rolling, annealing, pickling
Edge Processing
Mill Edge, Slit Edge
Tensile Strength Kb (MPa)
Yield Strength σ0.2 (MPa)
Elongation D5 (%)
Hardness(HRB)
Modulus of Elasticity(Gpa)
Melting Point(°C)
Density(g/cm³)
Coefficient of Thermal Conductivity(W/m*K)
Resistivity(ΜΩ. cm)
1400–1450
Frequently Asked Questions
Q: How long does it take to produce a custom order with special specifications?
A: It usually takes 25-30 days, depending on the complexity of the design. We'll confirm the exact lead time after evaluating your requirements.
Q: Do you offer technical support for product installation or usage?
A: Yes, our technical team can provide installation guides, video tutorials, or even on-site support if needed.
Q: Can you arrange door-to-door delivery service?
A: Yes, we can arrange door-to-door delivery through our freight forwarders, covering customs clearance and final transportation to your address.
Q: What testing reports can you provide for the products?
A: We can provide reports such as pressure test, chemical composition analysis, and mechanical property test, as per your request.
Q: Is there a warranty period for your products? How long is it?
A: Yes, all products have a 12-month warranty. During this period, we'll handle any quality-related issues free of charge.
