We make our inconel 600 pipe fittings from an alloy that sticks strictly to ASTM B163 standards-its makeup is 76% nickel, 16% chromium, and no more than 0.15% carbon. That exact mix is why these fittings hold up so well when things get tough in industrial settings.
They're total pros at handling high heat-you can run them nonstop at temperatures up to 1093°C (2000°F) and they won't lose their strength. In places like chemical plants or industrial boilers, they corrode way slower too-less than 0.02 mm a year, which is way better than regular stainless steel.
And another thing: these inconel 600 pipe fittings work with pressure classes from 150 to 900. So whether you're moving oil, gas, or corrosive chemicals through your pipelines, they'll fit right in and get the job done.
Every single inconel 600 pipe fitting goes through precision machining with our top-of-the-line CNC gear. We make sure the critical surfaces hit tolerances within ±0.004 inches-no ifs, ands, or buts. That means when you pair them with other parts, they'll fit perfectly every time.
After machining, we give them a special acid pickling treatment. This creates a protective oxide layer about 4μm thick. We tested it against ASTM A262 Practice A standards, and it cuts oxidation by 35% compared to fittings that don't get this treatment. That adds a lot more life to each fitting.
We also check every fitting with 100% dye penetrant inspection-following ASTM E165 rules. This finds any surface cracks or flaws, so you can be sure every piece we send meets our quality bar.
Right now, our factory has 22 CNC machining centers and 9 automated production lines working nonstop-no idle time here. That setup isn't just for show, either; it lets us crank out up to 100000 inconel 600 pipe fittings every year.
For you as a wholesale buyer, that means big orders aren't a problem. Even if you need 10,000 pieces or more, you won't be stuck waiting months-we've got way better turnaround than that. Those big batches? We can knock 'em out in just 3 to 4 weeks, so your inventory stays full, no long waits messing up your schedule.
We keep over 5000 fittings in stock at all times. We've got popular sizes: 3x2 inch, 6x4 inch-elbows, tees, reducers, you name it. Just ask us about stock, and if it's there, we'll ship it out within 48 hours, no delays.
To keep quality sharp, we use advanced X-ray fluorescence (XRF) analyzers. These check the alloy's composition down to 0.001% accuracy. Plus, every batch goes through creep testing at 815°C to make sure it holds up to heat long-term.
Right now, our factory has 22 CNC machining centers and 9 automated production lines working nonstop-no idle time here. That setup isn't just for show, either; it lets us crank out up to 100,000 inconel 600 pipe fittings every year.
For you as a wholesale buyer, that means big orders aren't a problem. Even if you need 10,000 pieces or more, you won't be stuck waiting months-we've got way better turnaround than that. Those big batches? We can knock 'em out in just 3 to 4 weeks, so your inventory stays full, no long waits messing up your schedule.
We keep over 5000 fittings in stock at all times. We've got popular sizes: 3x2 inch, 6x4 inch-elbows, tees, reducers, you name it. Just ask us about stock, and if it's there, we'll ship it out within 48 hours, no delays.
To keep quality sharp, we use advanced X-ray fluorescence (XRF) analyzers. These check the alloy's composition down to 0.001% accuracy. Plus, every batch goes through creep testing at 815°C to make sure it holds up to heat long-term.
Specification Details
Compliance Standard
Inconel 600 (Nickel: 72.0-78.0%, Chromium: 14.0-17.0%, Carbon: ≤0.15%)
Pressure Rating
Class 150 Class 300 Class 600 Class 900
Temperature Range
-196°C to 1093°C (-321°F to 2000°F) (continuous service)
Dimensional Tolerance
±0.004 inches (critical surfaces); ±0.01 inches (non-critical surfaces)
Surface Finish
Acid-pickled (oxide layer: 3-5 μm); Ra ≤ 1.6 μm (machined surfaces)
ASTM A262 Practice A
Mechanical Properties
Minimum 70 ksi (483 MPa)
Mechanical Properties
Minimum 30 ksi (207 MPa)
Common Fitting Types
Elbows (45°/90°), Tees, Reducers (Concentric/Eccentric), Couplings, Caps
Nickel (Ni)
Chromium (Cr)
Manganese (Mn)
Silicon (Si)
Copper (Cu)
Phosphorus (P)
Compliance Standard
Frequently Asked Questions
Q: Quality issues?
A: Non-human issues? Contact within 7 days with photos. We'll handle returns/exchanges/repairs.
Q: Payment methods?
A: Visa, Mastercard, PayPal, bank transfer-all work. Big orders? We can do prepayment + final payment. Ask sales for details.
Q: Product manuals?
A: Yep, each has one. Tricky products? Video guides-just ask customer service.
Q: Packaging?
A: Sturdy boxes with cushioning (fits shipping). Need custom? Just ask.
Q: Custom logo?
A: Sure. Send clear logo. Cost depends on size, placement, etc. Sample first-mass produce once you ok it.
